Pick-up
Coordinate free equipment or component pick-up when applicable.
24-Hour Rush Repair
Pump repair · Grecco
Grecco Pump Repair in Fontana
A tired Grecco pump rarely quits without warning — it loses flow, loses pressure or vacuum, runs noisy and hot, and only then stops the process behind it. We repair and rebuild Grecco pumps working in Grecco 750 colloid mill service in food, pharmaceutical and chemical grinding and emulsifying at our Fontana shop — strip, measure, renew the wear parts, reset internal clearances and test the finished pump so it goes back to work doing what it was built to do. Everything is done at 14166 Whittram Ave by the crew that quoted it, with no work farmed out.
Pump repair · Grecco
Where Grecco pumps lose their edge
The pattern we find at teardown on Grecco units is mill plate and rotor-stator gap wear that widens the grind, seal leakage in sanitary service, and bearing wear from high-speed mill duty. Rather than swapping parts on suspicion, we measure first — rotor, vane, piston and wear-plate clearances where they apply, shaft runout, bearing condition, seal faces and housing wear — then quote the renewal the measurements actually justify. Machining and manufacture happen in-house, so a worn shaft, a scored housing bore or a discontinued wear part is a shop job here, not a reason to scrap the pump. Rebuilt pumps are assembled with new seals and bearings, clearances set to specification, and test-run — flow, pressure or vacuum checked against the duty — before they leave Fontana.
Brands we serviceGreccoGouldsVikingWaukeshaBlackmerGracoBusch
Grecco Pump Repair in Fontana · Fontana, CARebuilt, tested and ready to go back on the line
Our shop hours are Monday to Friday, 6 AM to 5 PM, and rush and emergency pump service runs 24 hours a day, 365 days a year — because a dead pump rarely picks business hours. Call John Clark's team on (800) 821-3404 or (949) 400-2937, or write to [email protected], for a free quote.
- Grecco pump strip, measurement and full rebuild
- Wear parts, seals and bearings renewed from measured findings
- In-house machining for worn or discontinued parts
- Clearances reset to specification and test-run before release
- 24-hour emergency pump repair, every day of the year
Our 8-step repair process
A clear path from the first call to a tested component or machine returned to work.
Inspection
Disassemble and evaluate the complete failure.
Photos & video
Document condition and findings for a clear repair conversation.
Repair quote
Define the recommended work and quote before proceeding.
Approval
Confirm scope, urgency and the practical path forward.
Manufacturing
Machine, weld, rebuild or reverse engineer required components.
Testing
Verify operation and workmanship before release.
Shipment
Return the completed component or equipment to service.
Frequently asked questions
Can a Grecco 750 colloid mill be restored to a fine grind?
Yes — the rotor-stator gap is the heart of the mill. Worn elements are measured, restored or manufactured, the gap reset, and seals renewed for sanitary service.
Is my pump worth rebuilding or should I replace it?
If the housing, rotors and shaft are sound, a rebuild with renewed wear parts usually restores full performance for less than replacement — we measure first and tell you plainly which side of that line your pump is on.
Do you offer emergency pump repair?
Yes, 24 hours a day, 365 days a year. Call (800) 821-3404 or (949) 400-2937.
Related services
Emergency breakdown? Call the 24-hour rush line.
(949) 400-2937Schedule service or open a repair order
Request a service call.
Include the make, model, symptoms, location, urgency and preferred service time. Your details open in a text to John so you can review them before sending.